05-11-2012, 06:26 AM
apakah sudah cek voltase dan ampernya :
4. Connect a suitable loudspeaker or a 8 Ohm 20W resistor to the amplifier output.
5. Connect a Multimeter, set to measure about 50V fsd, across the positive end of C5 and the negative ground.
6. Switch on the supply and rotate R3 very slowly in order to read about 23V on the Multimeter display.
7. Switch off the supply, disconnect the Multimeter and reconnect it, set to measure at least 1Amp fsd, in series to the positive supply (the possible use of a second Multimeter in this place will be very welcomed).
8. Switch on the supply and rotate R4 very slowly until a reading of about 120mA is displayed.
ini skemanya :
http://www.redcircuits.com/MiniMosFet.GIF
4. Connect a suitable loudspeaker or a 8 Ohm 20W resistor to the amplifier output.
5. Connect a Multimeter, set to measure about 50V fsd, across the positive end of C5 and the negative ground.
6. Switch on the supply and rotate R3 very slowly in order to read about 23V on the Multimeter display.
7. Switch off the supply, disconnect the Multimeter and reconnect it, set to measure at least 1Amp fsd, in series to the positive supply (the possible use of a second Multimeter in this place will be very welcomed).
8. Switch on the supply and rotate R4 very slowly until a reading of about 120mA is displayed.
ini skemanya :
http://www.redcircuits.com/MiniMosFet.GIF
