11-07-2013, 02:57 AM
@haicall bukan ep5000 kang tp ep4000....
@jolodonk07 harga terbaru untuk ep4000 $379.99
@kaboel sjk gimana kalau pasang balak enam aja...,he lanjutttt
@aby_babnic haha...betul juga kang,sampe gak inget kalau besok2nya mau puasa....
Output Power ep4000 dan silahkan di bandingkan dengan H900tef
20Hz-20kHz @ 0.1 THD, both channels driven
8 ohms per channel: 550W
4 ohms per channel: 950W
2 ohms per channel: 1250W
RMS @ 1% THD (sine wave), bridged mode
8 ohms: 1750W
4 ohms: 2400W
Peak Power, both channels driven
8 ohms per channel: 400W
4 ohms per channel: 750W
2 ohms per channel: 1000W
Peak Power, bridged mode
8 ohms: 2800W
4 ohms: 4000W
Specifications
Distortion: <0.02%
Frequency Response
at 10dB below rated output power: 20Hz-20kHz,+0/-dB
at -3dBpoints: 5Hz-50kHz
Damping Factor: >300 @ 8 ohms
Noise, unweighted, 20Hz-20kHz: -100dB
Voltage Gain: 40X (32dB); 50X (34dB)
Input Sensitivity, VRMS (@ 8 ohms): 1.15V (+3.4dBu)
Input Impedance: 10k ohms unbalanced, 20k ohmbalanced
Controls
Front: Power switch, gain control (channels 1 and 2)
Rear: DIP switches(10x)
Indicators
POWER: green LED
CLIP: red LED, 1 per channel
SIGNAL: yellow LED, 1 per channel
Input Connectors: Balanced XLR and 1/4" TRSconnectors
Output Connectors: Touch-proof binding posts andprofessional speaker connectors
Cooling: Continuously variable speed fan,back-to-front air flow
Amplifier Protection: Full short circuit, opencircuit, thermal and HF protection; Stable into reactive or mismatched loads
Load Protection: Turn-on/off muting AC coupling
Output Circuit Type: Class H complementary linearoutput
Power Supply
Mains Voltage/Breaker: 220-230V~, 50/60Hz8A
PowerConsumption: 2600W
Mains Connector: Standard IECreceptacle
Dimensions (H x W x D): approx. 3.5" x 19" x 15.8"
Weight: 36.6 lbs
@jolodonk07 harga terbaru untuk ep4000 $379.99
@kaboel sjk gimana kalau pasang balak enam aja...,he lanjutttt
@aby_babnic haha...betul juga kang,sampe gak inget kalau besok2nya mau puasa....
Output Power ep4000 dan silahkan di bandingkan dengan H900tef
20Hz-20kHz @ 0.1 THD, both channels driven
8 ohms per channel: 550W
4 ohms per channel: 950W
2 ohms per channel: 1250W
RMS @ 1% THD (sine wave), bridged mode
8 ohms: 1750W
4 ohms: 2400W
Peak Power, both channels driven
8 ohms per channel: 400W
4 ohms per channel: 750W
2 ohms per channel: 1000W
Peak Power, bridged mode
8 ohms: 2800W
4 ohms: 4000W
Specifications
Distortion: <0.02%
Frequency Response
at 10dB below rated output power: 20Hz-20kHz,+0/-dB
at -3dBpoints: 5Hz-50kHz
Damping Factor: >300 @ 8 ohms
Noise, unweighted, 20Hz-20kHz: -100dB
Voltage Gain: 40X (32dB); 50X (34dB)
Input Sensitivity, VRMS (@ 8 ohms): 1.15V (+3.4dBu)
Input Impedance: 10k ohms unbalanced, 20k ohmbalanced
Controls
Front: Power switch, gain control (channels 1 and 2)
Rear: DIP switches(10x)
Indicators
POWER: green LED
CLIP: red LED, 1 per channel
SIGNAL: yellow LED, 1 per channel
Input Connectors: Balanced XLR and 1/4" TRSconnectors
Output Connectors: Touch-proof binding posts andprofessional speaker connectors
Cooling: Continuously variable speed fan,back-to-front air flow
Amplifier Protection: Full short circuit, opencircuit, thermal and HF protection; Stable into reactive or mismatched loads
Load Protection: Turn-on/off muting AC coupling
Output Circuit Type: Class H complementary linearoutput
Power Supply
Mains Voltage/Breaker: 220-230V~, 50/60Hz8A
PowerConsumption: 2600W
Mains Connector: Standard IECreceptacle
Dimensions (H x W x D): approx. 3.5" x 19" x 15.8"
Weight: 36.6 lbs
